2L Rotary Evaporator With Electric And Manual Lifting
- The parts in contact with materials are all made of high borosilicate glass (expansion coefficient 3.3) and polytetrafluoroethylene materials.
- The main frame is made of cold plate anti-corrosion spray + aluminum alloy material, and the pot is made of stainless steel. The sealing system adopts PTFE + fluorine rubber compound combination seal.
- The vacuum pressure gauge displays real-time vacuum and the pointer displays.
- One-piece condenser, upright double-layer serpentine coil, the collection bottle equipped with a cap-type PTFE valve.
- Rotating and heating power switch control, tilt button (ON-OFF).
- Electronic stepless speed regulation, fine-tuning by twisting, digital display of speed.
- Digital display of temperature of constant temperature bath, K-type sensor at the bottom of the pot + stainless steel probe.
- The handwheel of the heating bath rises and falls. Rotating, heating double fuse safety protection.
Plastic spray anticorrosion
Plastic spray anti-corrosion 265 * 310 * 80mm
Stainless steel 250 * 140mm
Rotary bottle volume
1L 24 # standard port
Collection bottle volume
0.5L 24# standard port
Electronic stepless speed regulation
Temperature display mode
Digital display of CU50 sensor
Temperature control method
Intelligent temperature control
PTFE component seal
Vertical condenser 85 * 460mm 29 # standard port
Host automatic lifting
19 # standard port feeding valve